专业生产换热器,板式换热器,螺旋板换热器,欢迎来到换热器网!

设为主页 | 加入收藏 | 企业邮箱

2 1

新闻中心

联系我们Contact us

联系人: 肖经理

手机: 15861401881

电话:0510-85186280
传真:0510-85180342
邮编:214133
网址:www.hreqi.com
邮箱:xmq881210@163.com


 

新闻中心

您当前的位置:首页>>新闻中心

螺旋板换热器的安装

螺旋板换热器的安装小易为你介绍一下。

螺旋板换热器头盖组件的安装:
1、将换热器升降台的工作机架降至地面,通过锁紧环接板头盖组件固定在专用工作机架的机头法兰盘上,利用加减支架配重调节平衡位置,直至水平。
2、将换热器工作机架和头盖组件一起吊起,调整其水平度,使其轴线与筒体轴线大致成一直线对中后,小心靠近管箱端面。
3、转动头盖组件直至管箱螺纹导向入口和螺纹锁紧环相旋合后,再缓慢旋入至原始位置。在旋进的过程中尽量控制好换热器头盖组件与壳体的同心度、垂直度,以减少安装阻力

英文:

The installation of spiral plate heat exchanger is easy to introduce for you.

Installation of head cover assembly of spiral plate heat exchanger:

1. The working frame of the heat exchanger elevator is lowered to the ground. The head flange of the special working frame is fixed by locking the ring plate head cover assembly. The balance position is adjusted by adding or subtracting the weight of the bracket until it reaches the level.

2. Lift the working rack of heat exchanger and the head cover assembly together, adjust its level, align the axes of heat exchanger with the axes of cylinder roughly in a straight line, and approach the end face of tube box carefully.

3. Turn the head cover assembly until the threaded guide inlet of the tube box and the threaded locking ring are rotated together, then slowly rotate into the original position. Controlling the concentricity and verticality of heat exchanger head cover assembly and shell as far as possible in the process of screwing in order to reduce installation resistance